author: Michal Simek <michal.simek@xilinx.com> 2020-11-26 14:32:25 +0100
committer: Michal Simek <michal.simek@xilinx.com> 2020-11-26 16:39:35 +0100
commit: 05cdf457477d6603b207d91873f0a3d4c7f8c1cd
parent: ed2124c0b9a8d2c09e3b5b9ca9827187c5fcbe71
Commit Summary:
Diffstat:
32 files changed, 11 insertions, 1157 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 33925ffed68f..32739ab2af25 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -3,19 +3,17 @@ config MICROBLAZE
def_bool y
select ARCH_32BIT_OFF_T
select ARCH_NO_SWAP
- select ARCH_HAS_BINFMT_FLAT if !MMU
select ARCH_HAS_DMA_PREP_COHERENT
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
- select ARCH_HAS_DMA_SET_UNCACHED if !MMU
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_WANT_IPC_PARSE_VERSION
select BUILDTIME_TABLE_SORT
select TIMER_OF
select CLONE_BACKWARDS3
select COMMON_CLK
- select DMA_DIRECT_REMAP if MMU
+ select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
@@ -45,7 +43,7 @@ config MICROBLAZE
select TRACING_SUPPORT
select VIRT_TO_BUS
select CPU_NO_EFFICIENT_FFS
- select MMU_GATHER_NO_RANGE if MMU
+ select MMU_GATHER_NO_RANGE
select SPARSE_IRQ
select SET_FS
@@ -96,8 +94,7 @@ menu "Processor type and features"
source "kernel/Kconfig.hz"
config MMU
- bool "MMU support"
- default n
+ def_bool y
comment "Boot options"
@@ -143,18 +140,8 @@ config ADVANCED_OPTIONS
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
-config XILINX_UNCACHED_SHADOW
- bool "Are you using uncached shadow for RAM ?"
- depends on ADVANCED_OPTIONS && !MMU
- default n
- help
- This is needed to be able to allocate uncachable memory regions.
- The feature requires the design to define the RAM memory controller
- window to be twice as large as the actual physical memory.
-
config HIGHMEM
bool "High memory support"
- depends on MMU
help
The address space of Microblaze processors is only 4 Gigabytes large
and it has to accommodate user address space, kernel address
@@ -167,7 +154,7 @@ config HIGHMEM
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
- depends on ADVANCED_OPTIONS && MMU
+ depends on ADVANCED_OPTIONS
help
This option allows you to set the maximum amount of memory which
will be used as "low memory", that is, memory which the kernel can
@@ -205,12 +192,11 @@ config KERNEL_START_BOOL
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
- default "0xc0000000" if MMU
- default KERNEL_BASE_ADDR if !MMU
+ default "0xc0000000"
config TASK_SIZE_BOOL
bool "Set custom user task size"
- depends on ADVANCED_OPTIONS && MMU
+ depends on ADVANCED_OPTIONS
help
This option allows you to set the amount of virtual address space
allocated to user tasks. This can be useful in optimizing the
@@ -222,33 +208,6 @@ config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000"
-choice
- prompt "Page size"
- default MICROBLAZE_4K_PAGES
- depends on ADVANCED_OPTIONS && !MMU
- help
- Select the kernel logical page size. Increasing the page size
- will reduce software overhead at each page boundary, allow
- hardware prefetch mechanisms to be more effective, and allow
- larger dma transfers increasing IO efficiency and reducing
- overhead. However the utilization of memory will increase.
- For example, each cached file will using a multiple of the
- page size to hold its contents and the difference between the
- end of file and the end of page is wasted.
-
- If unsure, choose 4K_PAGES.
-
-config MICROBLAZE_4K_PAGES
- bool "4k page size"
-
-config MICROBLAZE_16K_PAGES
- bool "16k page size"
-
-config MICROBLAZE_64K_PAGES
- bool "64k page size"
-
-endchoice
-
endmenu
menu "Bus Options"
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 7b340a35b194..bb980891816d 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -1,11 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
KBUILD_DEFCONFIG := mmu_defconfig
-ifeq ($(CONFIG_MMU),y)
UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
-else
-UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
-endif
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
@@ -67,12 +63,7 @@ DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
core-y += $(boot)/dts/
-# defines filename extension depending memory management type
-ifeq ($(CONFIG_MMU),)
-MMU := -nommu
-endif
-
-export MMU DTB
+export DTB
all: linux.bin
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 9b8a50f30662..51337fffb947 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -16,7 +16,6 @@ CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
CONFIG_HZ_100=y
-CONFIG_MMU=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE_FORCE=y
CONFIG_HIGHMEM=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
deleted file mode 100644
index 8c420782d6e4..000000000000
--- a/arch/microblaze/configs/nommu_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_BASE_FULL is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
-CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
-CONFIG_HZ_100=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_PCI_XILINX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_EFI_PARTITION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_PCI=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_UCLINUX=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_XILINX_LL_TEMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_XILINX_HWICAP=y
-CONFIG_I2C=y
-CONFIG_I2C_XILINX=y
-CONFIG_SPI=y
-CONFIG_SPI_XILINX=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_XILINX=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_XILINX_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_XILINX=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NLS=y
-CONFIG_KEYS=y
-CONFIG_ENCRYPTED_KEYS=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_DES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
index e6cb6d0725af..f801582be912 100644
--- a/arch/microblaze/include/asm/dma.h
+++ b/arch/microblaze/include/asm/dma.h
@@ -6,14 +6,8 @@
#ifndef _ASM_MICROBLAZE_DMA_H
#define _ASM_MICROBLAZE_DMA_H
-#ifndef CONFIG_MMU
-/* we don't have dma address limit. define it as zero to be
- * unlimited. */
-#define MAX_DMA_ADDRESS (0)
-#else
/* Virtual address corresponding to last available physical memory address. */
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
-#endif
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index d67e65b72215..967f175173e1 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -11,11 +11,6 @@
#define _ASM_MICROBLAZE_EXCEPTIONS_H
#ifdef __KERNEL__
-
-#ifndef CONFIG_MMU
-#define EX_HANDLER_STACK_SIZ (4*19)
-#endif
-
#ifndef __ASSEMBLY__
/* Macros to enable and disable HW exceptions in the MSR */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 1dd6fae41897..b6a57f8468f0 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -30,15 +30,12 @@ extern resource_size_t isa_mem_base;
#define PCI_IOBASE ((void __iomem *)_IO_BASE)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
-#ifdef CONFIG_MMU
#define page_to_bus(page) (page_to_phys(page))
extern void iounmap(volatile void __iomem *addr);
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#endif /* CONFIG_MMU */
-
/* Big Endian */
#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
#define out_be16(a, v) __raw_writew((v), (a))
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 97f1243101cc..b928a87c0076 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -8,9 +8,6 @@
#ifndef _ASM_MICROBLAZE_MMU_H
#define _ASM_MICROBLAZE_MMU_H
-# ifndef CONFIG_MMU
-# include <asm-generic/mmu.h>
-# else /* CONFIG_MMU */
# ifdef __KERNEL__
# ifndef __ASSEMBLY__
@@ -119,5 +116,4 @@ extern u32 tlb_skip;
# define TLB_G 0x00000001 /* Memory is guarded from prefetch */
# endif /* __KERNEL__ */
-# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_MMU_H */
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index f74f9da07fdc..866e52da5eb9 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,6 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifdef CONFIG_MMU
# include <asm/mmu_context_mm.h>
-#else
-# include <asm-generic/mmu_context.h>
-#endif
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index b13463d39b38..bf681f272f72 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -20,13 +20,7 @@
#ifdef __KERNEL__
/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_MICROBLAZE_64K_PAGES)
-#define PAGE_SHIFT 16
-#elif defined(CONFIG_MICROBLAZE_16K_PAGES)
-#define PAGE_SHIFT 14
-#else
#define PAGE_SHIFT 12
-#endif
#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
@@ -44,17 +38,6 @@
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
-#ifndef CONFIG_MMU
-/*
- * PAGE_OFFSET -- the first address of the first page of memory. When not
- * using MMU this corresponds to the first free page in physical memory (aligned
- * on a page boundary).
- */
-extern unsigned int __page_offset;
-#define PAGE_OFFSET __page_offset
-
-#else /* CONFIG_MMU */
-
/*
* PAGE_OFFSET -- the first address of the first page of memory. With MMU
* it is set to the kernel start address (aligned on a page boundary).
@@ -70,8 +53,6 @@ extern unsigned int __page_offset;
typedef unsigned long pte_basic_t;
#define PTE_FMT "%.8lx"
-#endif /* CONFIG_MMU */
-
# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
@@ -86,25 +67,12 @@ typedef struct page *pgtable_t;
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t;
/* FIXME this can depend on linux kernel version */
-# ifdef CONFIG_MMU
typedef struct { unsigned long pgd; } pgd_t;
-# else /* CONFIG_MMU */
-typedef struct { unsigned long ste[64]; } pmd_t;
-typedef struct { pmd_t pue[1]; } pud_t;
-typedef struct { pud_t p4e[1]; } p4d_t;
-typedef struct { p4d_t pge[1]; } pgd_t;
-# endif /* CONFIG_MMU */
# define pte_val(x) ((x).pte)
# define pgprot_val(x) ((x).pgprot)
-# ifdef CONFIG_MMU
# define pgd_val(x) ((x).pgd)
-# else /* CONFIG_MMU */
-# define pmd_val(x) ((x).ste[0])
-# define pud_val(x) ((x).pue[0])
-# define pgd_val(x) ((x).pge[0])
-# endif /* CONFIG_MMU */
# define __pte(x) ((pte_t) { (x) })
# define __pgd(x) ((pgd_t) { (x) })
@@ -142,28 +110,12 @@ extern int page_is_ram(unsigned long pfn);
# define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
# define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
-# ifdef CONFIG_MMU
-
# define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
# define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
# define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-# else /* CONFIG_MMU */
-# define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
-# define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
-# define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
-# define page_to_bus(page) (page_to_phys(page))
-# define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
-# endif /* CONFIG_MMU */
-
-# ifndef CONFIG_MMU
-# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && \
- ((pfn) <= (min_low_pfn + max_mapnr)))
-# define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
-# else /* CONFIG_MMU */
# define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT)
# define pfn_valid(pfn) ((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
-# endif /* CONFIG_MMU */
# endif /* __ASSEMBLY__ */
@@ -174,12 +126,6 @@ extern int page_is_ram(unsigned long pfn);
/* Convert between virtual and physical address for MMU. */
/* Handle MicroBlaze processor with virtual memory. */
-#ifndef CONFIG_MMU
-#define __virt_to_phys(addr) addr
-#define __phys_to_virt(addr) addr
-#define tophys(rd, rs) addik rd, rs, 0
-#define tovirt(rd, rs) addik rd, rs, 0
-#else
#define __virt_to_phys(addr) \
((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
#define __phys_to_virt(addr) \
@@ -188,14 +134,9 @@ extern int page_is_ram(unsigned long pfn);
addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
#define tovirt(rd, rs) \
addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
-#endif /* CONFIG_MMU */
#define TOPHYS(addr) __virt_to_phys(addr)
-#ifdef CONFIG_MMU
-
-#endif /* CONFIG_MMU */
-
#endif /* __KERNEL__ */
#include <asm-generic/memory_model.h>
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 8839ce00ea05..d56b9f670ad1 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -8,8 +8,6 @@
#ifndef _ASM_MICROBLAZE_PGALLOC_H
#define _ASM_MICROBLAZE_PGALLOC_H
-#ifdef CONFIG_MMU
-
#include <linux/kernel.h> /* For min/max macros */
#include <linux/highmem.h>
#include <linux/pgtable.h>
@@ -42,6 +40,4 @@ extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long) (pte))
-#endif /* CONFIG_MMU */
-
#endif /* _ASM_MICROBLAZE_PGALLOC_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 3fa1df90925e..9ae8d2c17dd5 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -14,47 +14,6 @@
extern int mem_init_done;
#endif
-#ifndef CONFIG_MMU
-
-#define pgd_present(pgd) (1) /* pages are always present on non MMU */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-
-#define PAGE_NONE __pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_SHARED __pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_COPY __pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_READONLY __pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_KERNEL __pgprot(0) /* these mean nothing to non MMU */
-
-#define pgprot_noncached(x) (x)
-#define pgprot_writecombine pgprot_noncached
-#define pgprot_device pgprot_noncached
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#define ZERO_PAGE(vaddr) ({ BUG(); NULL; })
-
-#define swapper_pg_dir ((pgd_t *) NULL)
-
-#define arch_enter_lazy_cpu_mode() do {} while (0)
-
-#define pgprot_noncached_wc(prot) prot
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#else /* CONFIG_MMU */
-
#include <asm-generic/pgtable-nopmd.h>
#ifdef __KERNEL__
@@ -491,8 +450,6 @@ void __init *early_get_page(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* CONFIG_MMU */
-
#ifndef __ASSEMBLY__
extern unsigned long ioremap_bot, ioremap_base;
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 1ff5a82b76b6..f4f3048cde4c 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -31,42 +31,6 @@ extern void ret_from_kernel_thread(void);
# endif /* __ASSEMBLY__ */
-# ifndef CONFIG_MMU
-/*
- * User space process size: memory size
- *
- * TASK_SIZE on MMU cpu is usually 1GB. However, on no-MMU arch, both
- * user processes and the kernel is on the same memory region. They
- * both share the memory space and that is limited by the amount of
- * physical memory. thus, we set TASK_SIZE == amount of total memory.
- */
-# define TASK_SIZE (0x81000000 - 0x80000000)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-# define TASK_UNMAPPED_BASE 0
-
-/* definition in include/linux/sched.h */
-struct task_struct;
-
-/* thread_struct is gone. use thread_info instead. */
-struct thread_struct { };
-# define INIT_THREAD { }
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-# define KSTK_EIP(tsk) (0)
-# define KSTK_ESP(tsk) (0)
-
-# else /* CONFIG_MMU */
-
/*
* This is used to define STACK_TOP, and with MMU it must be below
* kernel base to select the correct PGD when handling MMU exceptions.
@@ -133,5 +97,4 @@ extern struct dentry *of_debugfs_root;
#endif
# endif /* __ASSEMBLY__ */
-# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/registers.h b/arch/microblaze/include/asm/registers.h
index ee81e1cba008..6b36693fc621 100644
--- a/arch/microblaze/include/asm/registers.h
+++ b/arch/microblaze/include/asm/registers.h
@@ -27,7 +27,6 @@
#define FSR_UF (1<<1) /* Underflow */
#define FSR_DO (1<<0) /* Denormalized operand error */
-# ifdef CONFIG_MMU
/* Machine State Register (MSR) Fields */
# define MSR_UM (1<<11) /* User Mode */
# define MSR_UMS (1<<12) /* User Mode Save */
@@ -43,5 +42,4 @@
# define ESR_DIZ (1<<11) /* Zone Protection */
# define ESR_S (1<<10) /* Store instruction */
-# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_REGISTERS_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index be10da9d87cb..a06cc1f97aa9 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -14,9 +14,7 @@ extern char cmd_line[COMMAND_LINE_SIZE];
extern char *klimit;
-# ifdef CONFIG_MMU
extern void mmu_reset(void);
-# endif /* CONFIG_MMU */
void time_init(void);
void init_IRQ(void);
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index 1200e2bf14bb..2038168ed128 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -8,8 +8,6 @@
#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
#define _ASM_MICROBLAZE_TLBFLUSH_H
-#ifdef CONFIG_MMU
-
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/processor.h> /* For TASK_SIZE */
@@ -50,16 +48,4 @@ static inline void local_flush_tlb_range(struct vm_area_struct *vma,
static inline void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end) { }
-#else /* CONFIG_MMU */
-
-#define flush_tlb() BUG()
-#define flush_tlb_all() BUG()
-#define flush_tlb_mm(mm) BUG()
-#define flush_tlb_page(vma, addr) BUG()
-#define flush_tlb_range(mm, start, end) BUG()
-#define flush_tlb_pgtables(mm, start, end) BUG()
-#define flush_tlb_kernel_range(start, end) BUG()
-
-#endif /* CONFIG_MMU */
-
#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 304b04ffea2f..c44b59470e45 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -30,35 +30,14 @@
*/
# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-# ifndef CONFIG_MMU
-# define KERNEL_DS MAKE_MM_SEG(0)
-# define USER_DS KERNEL_DS
-# else
# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
-# endif
# define get_fs() (current_thread_info()->addr_limit)
# define set_fs(val) (current_thread_info()->addr_limit = (val))
# define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-#ifndef CONFIG_MMU
-
-/* Check against bounds of physical memory */
-static inline int ___range_ok(unsigned long addr, unsigned long size)
-{
- return ((addr < memory_start) ||
- ((addr + size - 1) > (memory_start + memory_size - 1)));
-}
-
-#define __range_ok(addr, size) \
- ___range_ok((unsigned long)(addr), (unsigned long)(size))
-
-#define access_ok(addr, size) (__range_ok((addr), (size)) == 0)
-
-#else
-
static inline int access_ok(const void __user *addr, unsigned long size)
{
if (!size)
@@ -77,15 +56,9 @@ ok:
(u32)get_fs().seg);
return 1;
}
-#endif
-#ifdef CONFIG_MMU
# define __FIXUP_SECTION ".section .fixup,\"ax\"\n"
# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n"
-#else
-# define __FIXUP_SECTION ".section .discard,\"ax\"\n"
-# define __EX_TABLE_SECTION ".section .discard,\"ax\"\n"
-#endif
extern unsigned long __copy_tofrom_user(void __user *to,
const void __user *from, unsigned long size);
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index dd71637437f4..15a20eb814ce 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -22,9 +22,9 @@ obj-y += dma.o exceptions.o \
obj-y += cpu/
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
-obj-$(CONFIG_MMU) += misc.o
+obj-y += misc.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-y += entry$(MMU).o
+obj-y += entry.o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index c1b459c97571..6c69ce7be2e8 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -70,7 +70,6 @@ int main(int argc, char *argv[])
/* struct task_struct */
DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
-#ifdef CONFIG_MMU
DEFINE(TASK_STATE, offsetof(struct task_struct, state));
DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
@@ -84,7 +83,6 @@ int main(int argc, char *argv[])
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
BLANK();
-#endif
/* struct thread_info */
DEFINE(TI_TASK, offsetof(struct thread_info, task));
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
deleted file mode 100644
index 7e394fc2c439..000000000000
--- a/arch/microblaze/kernel/entry-nommu.S
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2007-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <linux/errno.h>
-#include <asm/entry.h>
-#include <asm/asm-offsets.h>
-#include <asm/registers.h>
-#include <asm/unistd.h>
-#include <asm/percpu.h>
-#include <asm/signal.h>
-
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
- .macro disable_irq
- msrclr r0, MSR_IE
- .endm
-
- .macro enable_irq
- msrset r0, MSR_IE
- .endm
-
- .macro clear_bip
- msrclr r0, MSR_BIP
- .endm
-#else
- .macro disable_irq
- mfs r11, rmsr
- andi r11, r11, ~MSR_IE
- mts rmsr, r11
- .endm
-
- .macro enable_irq
- mfs r11, rmsr
- ori r11, r11, MSR_IE
- mts rmsr, r11
- .endm
-
- .macro clear_bip
- mfs r11, rmsr
- andi r11, r11, ~MSR_BIP
- mts rmsr, r11
- .endm
-#endif
-
-ENTRY(_interrupt)
- swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
- swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
- lwi r11, r0, PER_CPU(KM) /* load mode indicator */
- beqid r11, 1f
- nop
- brid 2f /* jump over */
- addik r1, r1, (-PT_SIZE) /* room for pt_regs (delay slot) */
-1: /* switch to kernel stack */
- lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
- lwi r1, r1, TS_THREAD_INFO /* get the thread info */
- /* calculate kernel stack pointer */
- addik r1, r1, THREAD_SIZE - PT_SIZE
-2:
- swi r11, r1, PT_MODE /* store the mode */
- lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
- swi r2, r1, PT_R2
- swi r3, r1, PT_R3
- swi r4, r1, PT_R4
- swi r5, r1, PT_R5
- swi r6, r1, PT_R6
- swi r7, r1, PT_R7
- swi r8, r1, PT_R8
- swi r9, r1, PT_R9
- swi r10, r1, PT_R10
- swi r11, r1, PT_R11
- swi r12, r1, PT_R12
- swi r13, r1, PT_R13
- swi r14, r1, PT_R14
- swi r14, r1, PT_PC
- swi r15, r1, PT_R15
- swi r16, r1, PT_R16
- swi r17, r1, PT_R17
- swi r18, r1, PT_R18
- swi r19, r1, PT_R19
- swi r20, r1, PT_R20
- swi r21, r1, PT_R21
- swi r22, r1, PT_R22
- swi r23, r1, PT_R23
- swi r24, r1, PT_R24
- swi r25, r1, PT_R25
- swi r26, r1, PT_R26
- swi r27, r1, PT_R27
- swi r28, r1, PT_R28
- swi r29, r1, PT_R29
- swi r30, r1, PT_R30
- swi r31, r1, PT_R31
- /* special purpose registers */
- mfs r11, rmsr
- swi r11, r1, PT_MSR
- mfs r11, rear
- swi r11, r1, PT_EAR
- mfs r11, resr
- swi r11, r1, PT_ESR
- mfs r11, rfsr
- swi r11, r1, PT_FSR
- /* reload original stack pointer and save it */
- lwi r11, r0, PER_CPU(ENTRY_SP)
- swi r11, r1, PT_R1
- /* update mode indicator we are in kernel mode */
- addik r11, r0, 1
- swi r11, r0, PER_CPU(KM)
- /* restore r31 */
- lwi r31, r0, PER_CPU(CURRENT_SAVE)
- /* prepare the link register, the argument and jump */
- addik r15, r0, ret_from_intr - 8
- addk r6, r0, r15
- braid do_IRQ
- add r5, r0, r1
-
-ret_from_intr:
- lwi r11, r1, PT_MODE
- bneid r11, no_intr_resched
-
-3:
- lwi r6, r31, TS_THREAD_INFO /* get thread info */
- lwi r19, r6, TI_FLAGS /* get flags in thread info */
- /* do an extra work if any bits are set */
-
- andi r11, r19, _TIF_NEED_RESCHED
- beqi r11, 1f
- bralid r15, schedule
- nop
- bri 3b
-1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME
- beqid r11, no_intr_resched
- addk r5, r1, r0
- bralid r15, do_notify_resume
- addk r6, r0, r0
- bri 3b
-
-no_intr_resched:
- /* Disable interrupts, we are now committed to the state restore */
- disable_irq
-
- /* save mode indicator */
- lwi r11, r1, PT_MODE
- swi r11, r0, PER_CPU(KM)
-
- /* save r31 */
- swi r31, r0, PER_CPU(CURRENT_SAVE)
-restore_context:
- /* special purpose registers */
- lwi r11, r1, PT_FSR
- mts rfsr, r11
- lwi r11, r1, PT_ESR
- mts resr, r11
- lwi r11, r1, PT_EAR
- mts rear, r11
- lwi r11, r1, PT_MSR
- mts rmsr, r11
-
- lwi r31, r1, PT_R31
- lwi r30, r1, PT_R30
- lwi r29, r1, PT_R29
- lwi r28, r1, PT_R28
- lwi r27, r1, PT_R27
- lwi r26, r1, PT_R26
- lwi r25, r1, PT_R25
- lwi r24, r1, PT_R24
- lwi r23, r1, PT_R23
- lwi r22, r1, PT_R22
- lwi r21, r1, PT_R21
- lwi r20, r1, PT_R20
- lwi r19, r1, PT_R19
- lwi r18, r1, PT_R18
- lwi r17, r1, PT_R17
- lwi r16, r1, PT_R16
- lwi r15, r1, PT_R15
- lwi r14, r1, PT_PC
- lwi r13, r1, PT_R13
- lwi r12, r1, PT_R12
- lwi r11, r1, PT_R11
- lwi r10, r1, PT_R10
- lwi r9, r1, PT_R9
- lwi r8, r1, PT_R8
- lwi r7, r1, PT_R7
- lwi r6, r1, PT_R6
- lwi r5, r1, PT_R5
- lwi r4, r1, PT_R4
- lwi r3, r1, PT_R3
- lwi r2, r1, PT_R2
- lwi r1, r1, PT_R1
- rtid r14, 0
- nop
-
-ENTRY(_reset)
- brai 0;
-
-ENTRY(_user_exception)
- swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
- swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
- lwi r11, r0, PER_CPU(KM) /* load mode indicator */
- beqid r11, 1f /* Already in kernel mode? */
- nop
- brid 2f /* jump over */
- addik r1, r1, (-PT_SIZE) /* Room for pt_regs (delay slot) */
-1: /* Switch to kernel stack */
- lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
- lwi r1, r1, TS_THREAD_INFO /* get the thread info */
- /* calculate kernel stack pointer */
- addik r1, r1, THREAD_SIZE - PT_SIZE
-2:
- swi r11, r1, PT_MODE /* store the mode */
- lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
- /* save them on stack */
- swi r2, r1, PT_R2
- swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
- swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
- swi r5, r1, PT_R5
- swi r6, r1, PT_R6
- swi r7, r1, PT_R7
- swi r8, r1, PT_R8
- swi r9, r1, PT_R9
- swi r10, r1, PT_R10
- swi r11, r1, PT_R11
- /* r12: _always_ in clobber list; see unistd.h */
- swi r12, r1, PT_R12
- swi r13, r1, PT_R13
- /* r14: _always_ in clobber list; see unistd.h */
- swi r14, r1, PT_R14
- /* but we want to return to the next inst. */
- addik r14, r14, 0x4
- swi r14, r1, PT_PC /* increment by 4 and store in pc */
- swi r15, r1, PT_R15
- swi r16, r1, PT_R16
- swi r17, r1, PT_R17
- swi r18, r1, PT_R18
- swi r19, r1, PT_R19
- swi r20, r1, PT_R20
- swi r21, r1, PT_R21
- swi r22, r1, PT_R22
- swi r23, r1, PT_R23
- swi r24, r1, PT_R24
- swi r25, r1, PT_R25
- swi r26, r1, PT_R26
- swi r27, r1, PT_R27
- swi r28, r1, PT_R28
- swi r29, r1, PT_R29
- swi r30, r1, PT_R30
- swi r31, r1, PT_R31
-
- disable_irq
- nop /* make sure IE bit is in effect */
- clear_bip /* once IE is in effect it is safe to clear BIP */
- nop
-
- /* special purpose registers */
- mfs r11, rmsr
- swi r11, r1, PT_MSR
- mfs r11, rear
- swi r11, r1, PT_EAR
- mfs r11, resr
- swi r11, r1, PT_ESR
- mfs r11, rfsr
- swi r11, r1, PT_FSR
- /* reload original stack pointer and save it */
- lwi r11, r0, PER_CPU(ENTRY_SP)
- swi r11, r1, PT_R1
- /* update mode indicator we are in kernel mode */
- addik r11, r0, 1
- swi r11, r0, PER_CPU(KM)
- /* restore r31 */
- lwi r31, r0, PER_CPU(CURRENT_SAVE)
- /* re-enable interrupts now we are in kernel mode */
- enable_irq
-
- /* See if the system call number is valid. */
- addi r11, r12, -__NR_syscalls
- bgei r11, 1f /* return to user if not valid */
- /* Figure out which function to use for this system call. */
- /* Note Microblaze barrel shift is optional, so don't rely on it */
- add r12, r12, r12 /* convert num -> ptr */
- addik r30, r0, 1 /* restarts allowed */
- add r12, r12, r12
- lwi r12, r12, sys_call_table /* Get function pointer */
- addik r15, r0, ret_to_user-8 /* set return address */
- bra r12 /* Make the system call. */
- bri 0 /* won't reach here */
-1:
- brid ret_to_user /* jump to syscall epilogue */
- addi r3, r0, -ENOSYS /* set errno in delay slot */
-
-/*
- * Debug traps are like a system call, but entered via brki r14, 0x60
- * All we need to do is send the SIGTRAP signal to current, ptrace and
- * do_notify_resume will handle the rest
- */
-ENTRY(_debug_exception)
- swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
- lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
- lwi r1, r1, TS_THREAD_INFO /* get the thread info */
- addik r1, r1, THREAD_SIZE - PT_SIZE /* get the kernel stack */
- swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
- lwi r11, r0, PER_CPU(KM) /* load mode indicator */
-//save_context:
- swi r11, r1, PT_MODE /* store the mode */
- lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
- /* save them on stack */
- swi r2, r1, PT_R2
- swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
- swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
- swi r5, r1, PT_R5
- swi r6, r1, PT_R6
- swi r7, r1, PT_R7
- swi r8, r1, PT_R8
- swi r9, r1, PT_R9
- swi r10, r1, PT_R10
- swi r11, r1, PT_R11
- /* r12: _always_ in clobber list; see unistd.h */
- swi r12, r1, PT_R12
- swi r13, r1, PT_R13
- /* r14: _always_ in clobber list; see unistd.h */
- swi r14, r1, PT_R14
- swi r14, r1, PT_PC /* Will return to interrupted instruction */
- swi r15, r1, PT_R15
- swi r16, r1, PT_R16
- swi r17, r1, PT_R17
- swi r18, r1, PT_R18
- swi r19, r1, PT_R19
- swi r20, r1, PT_R20
- swi r21, r1, PT_R21
- swi r22, r1, PT_R22
- swi r23, r1, PT_R23
- swi r24, r1, PT_R24
- swi r25, r1, PT_R25
- swi r26, r1, PT_R26
- swi r27, r1, PT_R27
- swi r28, r1, PT_R28
- swi r29, r1, PT_R29
- swi r30, r1, PT_R30
- swi r31, r1, PT_R31
-
- disable_irq
- nop /* make sure IE bit is in effect */
- clear_bip /* once IE is in effect it is safe to clear BIP */
- nop
-
- /* special purpose registers */
- mfs r11, rmsr
- swi r11, r1, PT_MSR
- mfs r11, rear
- swi r11, r1, PT_EAR
- mfs r11, resr
- swi r11, r1, PT_ESR
- mfs r11, rfsr
- swi r11, r1, PT_FSR
- /* reload original stack pointer and save it */
- lwi r11, r0, PER_CPU(ENTRY_SP)
- swi r11, r1, PT_R1
- /* update mode indicator we are in kernel mode */
- addik r11, r0, 1
- swi r11, r0, PER_CPU(KM)
- /* restore r31 */
- lwi r31, r0, PER_CPU(CURRENT_SAVE)
- /* re-enable interrupts now we are in kernel mode */
- enable_irq
-
- addi r5, r0, SIGTRAP /* sending the trap signal */
- add r6, r0, r31 /* to current */
- bralid r15, send_sig
- add r7, r0, r0 /* 3rd param zero */
-
- addik r30, r0, 1 /* restarts allowed ??? */
- /* Restore r3/r4 to work around how ret_to_user works */
- lwi r3, r1, PT_R3
- lwi r4, r1, PT_R4
- bri ret_to_user
-
-ENTRY(_break)
- bri 0
-
-/* struct task_struct *_switch_to(struct thread_info *prev,
- struct thread_info *next); */
-ENTRY(_switch_to)
- /* prepare return value */
- addk r3, r0, r31
-
- /* save registers in cpu_context */
- /* use r11 and r12, volatile registers, as temp register */
- addik r11, r5, TI_CPU_CONTEXT
- swi r1, r11, CC_R1
- swi r2, r11, CC_R2
- /* skip volatile registers.
- * they are saved on stack when we jumped to _switch_to() */
- /* dedicated registers */
- swi r13, r11, CC_R13
- swi r14, r11, CC_R14
- swi r15, r11, CC_R15
- swi r16, r11, CC_R16
- swi r17, r11, CC_R17
- swi r18, r11, CC_R18
- /* save non-volatile registers */
- swi r19, r11, CC_R19
- swi r20, r11, CC_R20
- swi r21, r11, CC_R21
- swi r22, r11, CC_R22
- swi r23, r11, CC_R23
- swi r24, r11, CC_R24
- swi r25, r11, CC_R25
- swi r26, r11, CC_R26
- swi r27, r11, CC_R27
- swi r28, r11, CC_R28
- swi r29, r11, CC_R29
- swi r30, r11, CC_R30
- /* special purpose registers */
- mfs r12, rmsr
- swi r12, r11, CC_MSR
- mfs r12, rear
- swi r12, r11, CC_EAR
- mfs r12, resr
- swi r12, r11, CC_ESR
- mfs r12, rfsr
- swi r12, r11, CC_FSR
-
- /* update r31, the current */
- lwi r31, r6, TI_TASK
- swi r31, r0, PER_CPU(CURRENT_SAVE)
-
- /* get new process' cpu context and restore */
- addik r11, r6, TI_CPU_CONTEXT
-
- /* special purpose registers */
- lwi r12, r11, CC_FSR
- mts rfsr, r12
- lwi r12, r11, CC_ESR
- mts resr, r12
- lwi r12, r11, CC_EAR
- mts rear, r12
- lwi r12, r11, CC_MSR
- mts rmsr, r12
- /* non-volatile registers */
- lwi r30, r11, CC_R30
- lwi r29, r11, CC_R29
- lwi r28, r11, CC_R28
- lwi r27, r11, CC_R27
- lwi r26, r11, CC_R26
- lwi r25, r11, CC_R25
- lwi r24, r11, CC_R24
- lwi r23, r11, CC_R23
- lwi r22, r11, CC_R22
- lwi r21, r11, CC_R21
- lwi r20, r11, CC_R20
- lwi r19, r11, CC_R19
- /* dedicated registers */
- lwi r18, r11, CC_R18
- lwi r17, r11, CC_R17
- lwi r16, r11, CC_R16
- lwi r15, r11, CC_R15
- lwi r14, r11, CC_R14
- lwi r13, r11, CC_R13
- /* skip volatile registers */
- lwi r2, r11, CC_R2
- lwi r1, r11, CC_R1
-
- rtsd r15, 8
- nop
-
-ENTRY(ret_from_fork)
- addk r5, r0, r3
- brlid r15, schedule_tail
- nop
- swi r31, r1, PT_R31 /* save r31 in user context. */
- /* will soon be restored to r31 in ret_to_user */
- addk r3, r0, r0
- brid ret_to_user
- nop
-
-ENTRY(ret_from_kernel_thread)
- brlid r15, schedule_tail
- addk r5, r0, r3
- brald r15, r20
- addk r5, r0, r19
- brid ret_to_user
- addk r3, r0, r0
-
-work_pending:
- lwi r11, r1, PT_MODE
- bneid r11, 2f
-3:
- enable_irq
- andi r11, r19, _TIF_NEED_RESCHED
- beqi r11, 1f
- bralid r15, schedule
- nop
- bri 4f
-1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME
- beqi r11, no_work_pending
- addk r5, r30, r0
- bralid r15, do_notify_resume
- addik r6, r0, 1
- addk r30, r0, r0 /* no restarts from now on */
-4:
- disable_irq
- lwi r6, r31, TS_THREAD_INFO /* get thread info */
- lwi r19, r6, TI_FLAGS /* get flags in thread info */
- bri 3b
-
-ENTRY(ret_to_user)
- disable_irq
-
- swi r4, r1, PT_R4 /* return val */
- swi r3, r1, PT_R3 /* return val */
-
- lwi r6, r31, TS_THREAD_INFO /* get thread info */
- lwi r19, r6, TI_FLAGS /* get flags in thread info */
- bnei r19, work_pending /* do an extra work if any bits are set */
-no_work_pending:
- disable_irq
-
-2:
- /* save r31 */
- swi r31, r0, PER_CPU(CURRENT_SAVE)
- /* save mode indicator */
- lwi r18, r1, PT_MODE
- swi r18, r0, PER_CPU(KM)
-//restore_context:
- /* special purpose registers */
- lwi r18, r1, PT_FSR
- mts rfsr, r18
- lwi r18, r1, PT_ESR
- mts resr, r18
- lwi r18, r1, PT_EAR
- mts rear, r18
- lwi r18, r1, PT_MSR
- mts rmsr, r18
-
- lwi r31, r1, PT_R31
- lwi r30, r1, PT_R30
- lwi r29, r1, PT_R29
- lwi r28, r1, PT_R28
- lwi r27, r1, PT_R27
- lwi r26, r1, PT_R26
- lwi r25, r1, PT_R25
- lwi r24, r1, PT_R24
- lwi r23, r1, PT_R23
- lwi r22, r1, PT_R22
- lwi r21, r1, PT_R21
- lwi r20, r1, PT_R20
- lwi r19, r1, PT_R19
- lwi r18, r1, PT_R18
- lwi r17, r1, PT_R17
- lwi r16, r1, PT_R16
- lwi r15, r1, PT_R15
- lwi r14, r1, PT_PC
- lwi r13, r1, PT_R13
- lwi r12, r1, PT_R12
- lwi r11, r1, PT_R11
- lwi r10, r1, PT_R10
- lwi r9, r1, PT_R9
- lwi r8, r1, PT_R8
- lwi r7, r1, PT_R7
- lwi r6, r1, PT_R6
- lwi r5, r1, PT_R5
- lwi r4, r1, PT_R4 /* return val */
- lwi r3, r1, PT_R3 /* return val */
- lwi r2, r1, PT_R2
- lwi r1, r1, PT_R1
-
- rtid r14, 0
- nop
-
-sys_rt_sigreturn_wrapper:
- addk r30, r0, r0 /* no restarts for this one */
- brid sys_rt_sigreturn
- addk r5, r1, r0
-
- /* Interrupt vector table */
- .section .init.ivt, "ax"
- .org 0x0
- brai _reset
- brai _user_exception
- brai _interrupt
- brai _break
- brai _hw_exception_handler
- .org 0x60
- brai _debug_exception
-
-.section .rodata,"a"
-#include "syscall_table.S"
-
-syscall_table_size=(.-sys_call_table)
-
-type_SYSCALL:
- .ascii "SYSCALL\0"
-type_IRQ:
- .ascii "IRQ\0"
-type_IRQ_PREEMPT:
- .ascii "IRQ (PREEMPTED)\0"
-type_SYSCALL_PREEMPT:
- .ascii " SYSCALL (PREEMPTED)\0"
-
- /*
- * Trap decoding for stack unwinder
- * Tuples are (start addr, end addr, string)
- * If return address lies on [start addr, end addr],
- * unwinder displays 'string'
- */
-
- .align 4
-.global microblaze_trap_handlers
-microblaze_trap_handlers:
- /* Exact matches come first */
- .word ret_to_user ; .word ret_to_user ; .word type_SYSCALL
- .word ret_from_intr; .word ret_from_intr ; .word type_IRQ
- /* Fuzzy matches go here */
- .word ret_from_intr; .word no_intr_resched; .word type_IRQ_PREEMPT
- .word work_pending ; .word no_work_pending; .word type_SYSCALL_PREEMPT
- /* End of table */
- .word 0 ; .word 0 ; .word 0
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index cf99c411503e..908788497b28 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -69,9 +69,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
int fsr, int addr)
{
-#ifdef CONFIG_MMU
addr = regs->pc;
-#endif
#if 0
pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
@@ -132,13 +130,10 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
fsr = FPE_FLTRES;
_exception(SIGFPE, regs, fsr, addr);
break;
-
-#ifdef CONFIG_MMU
case MICROBLAZE_PRIVILEGED_EXCEPTION:
pr_debug("Privileged exception\n");
_exception(SIGILL, regs, ILL_PRVOPC, addr);
break;
-#endif
default:
/* FIXME what to do in unexpected exception */
pr_warn("Unexpected exception %02x PC=%08x in %s mode\n",
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 14b276406153..ec2fcb545e64 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -34,7 +34,6 @@
#include <asm/page.h>
#include <linux/of_fdt.h> /* for OF_DT_HEADER */
-#ifdef CONFIG_MMU
#include <asm/setup.h> /* COMMAND_LINE_SIZE */
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -48,8 +47,6 @@ empty_zero_page:
swapper_pg_dir:
.space PAGE_SIZE
-#endif /* CONFIG_MMU */
-
.section .rodata
.align 4
endian_check:
@@ -108,8 +105,6 @@ _copy_fdt:
addik r3, r3, -4 /* descrement loop */
no_fdt_arg:
-#ifdef CONFIG_MMU
-
#ifndef CONFIG_CMDLINE_BOOL
/*
* handling command line
@@ -329,7 +324,6 @@ turn_on_mmu:
nop
start_here:
-#endif /* CONFIG_MMU */
/* Initialize small data anchors */
addik r13, r0, _KERNEL_SDA_BASE_
@@ -345,11 +339,6 @@ start_here:
brald r15, r11
nop
-#ifndef CONFIG_MMU
- addik r15, r0, machine_halt
- braid start_kernel
- nop
-#else
/*
* Initialize the MMU.
*/
@@ -383,4 +372,3 @@ kernel_load_context:
nop
rted r17, 0 /* enable MMU and jump to start_kernel */
nop
-#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 54411de22fa6..07ea23965f81 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -80,7 +80,6 @@
/* Helpful Macros */
#define NUM_TO_REG(num) r ## num
-#ifdef CONFIG_MMU
#define RESTORE_STATE \
lwi r5, r1, 0; \
mts rmsr, r5; \
@@ -92,7 +91,6 @@
lwi r11, r1, PT_R11; \
lwi r31, r1, PT_R31; \
lwi r1, r1, PT_R1;
-#endif /* CONFIG_MMU */
#define LWREG_NOP \
bri ex_handler_unhandled; \
@@ -102,10 +100,6 @@
bri ex_handler_unhandled; \
nop;
-/* FIXME this is weird - for noMMU kernel is not possible to use brid
- * instruction which can shorten executed time
- */
-
/* r3 is the source */
#define R3_TO_LWREG_V(regnum) \
swi r3, r1, 4 * regnum; \
@@ -126,7 +120,6 @@
or r3, r0, NUM_TO_REG (regnum); \
bri ex_sw_tail;
-#ifdef CONFIG_MMU
#define R3_TO_LWREG_VM_V(regnum) \
brid ex_lw_end_vm; \
swi r3, r7, 4 * regnum;
@@ -193,7 +186,6 @@
.endm
#endif
-#endif /* CONFIG_MMU */
.extern other_exception_handler /* Defined in exception.c */
@@ -251,7 +243,6 @@
*/
/* wrappers to restore state before coming to entry.S */
-#ifdef CONFIG_MMU
.section .data
.align 4
pt_pool_space:
@@ -316,31 +307,24 @@ _MB_HW_ExceptionVectorTable:
.long TOPHYS(ex_handler_unhandled)
.long TOPHYS(ex_handler_unhandled)
.long TOPHYS(ex_handler_unhandled)
-#endif
.global _hw_exception_handler
.section .text
.align 4
.ent _hw_exception_handler
_hw_exception_handler:
-#ifndef CONFIG_MMU
- addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
-#else
swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */
/* Save date to kernel memory. Here is the problem
* when you came from user space */
ori r1, r0, TOPHYS(pt_pool_space);
-#endif
swi r3, r1, PT_R3
swi r4, r1, PT_R4
swi r5, r1, PT_R5
swi r6, r1, PT_R6
-#ifdef CONFIG_MMU
swi r11, r1, PT_R11
swi r31, r1, PT_R31
lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
-#endif
mfs r5, rmsr;
nop
@@ -350,18 +334,8 @@ _hw_exception_handler:
mfs r3, rear;
nop
-#ifndef CONFIG_MMU
- andi r5, r4, 0x1000; /* Check ESR[DS] */
- beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */
- mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
- nop
-not_in_delay_slot:
- swi r17, r1, PT_R17
-#endif
-
andi r5, r4, 0x1F; /* Extract ESR[EXC] */
-#ifdef CONFIG_MMU
/* Calculate exception vector offset = r5 << 2 */
addk r6, r5, r5; /* << 1 */
addk r6, r6, r6; /* << 2 */
@@ -383,73 +357,6 @@ not_in_delay_slot:
full_exception_trapw:
RESTORE_STATE
bri full_exception_trap
-#else
- /* Exceptions enabled here. This will allow nested exceptions */
- mfs r6, rmsr;
- nop
- swi r6, r1, 0; /* RMSR_OFFSET */
- ori r6, r6, 0x100; /* Turn ON the EE bit */
- andi r6, r6, ~2; /* Disable interrupts */
- mts rmsr, r6;
- nop
-
- xori r6, r5, 1; /* 00001 = Unaligned Exception */
- /* Jump to unalignment exception handler */
- beqi r6, handle_unaligned_ex;
-
-handle_other_ex: /* Handle Other exceptions here */
- /* Save other volatiles before we make procedure calls below */
- swi r7, r1, PT_R7
- swi r8, r1, PT_R8
- swi r9, r1, PT_R9
- swi r10, r1, PT_R10
- swi r11, r1, PT_R11
- swi r12, r1, PT_R12
- swi r14, r1, PT_R14
- swi r15, r1, PT_R15
- swi r18, r1, PT_R18
-
- or r5, r1, r0
- andi r6, r4, 0x1F; /* Load ESR[EC] */
- lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
- swi r7, r1, PT_MODE
- mfs r7, rfsr
- nop
- addk r8, r17, r0; /* Load exception address */
- bralid r15, full_exception; /* Branch to the handler */
- nop;
- mts rfsr, r0; /* Clear sticky fsr */
- nop
-
- /*
- * Trigger execution of the signal handler by enabling
- * interrupts and calling an invalid syscall.
- */
- mfs r5, rmsr;
- nop
- ori r5, r5, 2;
- mts rmsr, r5; /* enable interrupt */
- nop
- addi r12, r0, __NR_syscalls;
- brki r14, 0x08;
- mfs r5, rmsr; /* disable interrupt */
- nop
- andi r5, r5, ~2;
- mts rmsr, r5;
- nop
-
- lwi r7, r1, PT_R7
- lwi r8, r1, PT_R8
- lwi r9, r1, PT_R9
- lwi r10, r1, PT_R10
- lwi r11, r1, PT_R11
- lwi r12, r1, PT_R12
- lwi r14, r1, PT_R14
- lwi r15, r1, PT_R15
- lwi r18, r1, PT_R18
-
- bri ex_handler_done; /* Complete exception handling */
-#endif
/* 0x01 - Unaligned data access exception
* This occurs when a word access is not aligned on a word boundary,
@@ -463,7 +370,6 @@ handle_unaligned_ex:
* R4 = ESR
* R3 = EAR
*/
-#ifdef CONFIG_MMU
andi r6, r4, 0x1000 /* Check ESR[DS] */
beqi r6, _no_delayslot /* Branch if ESR[DS] not set */
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
@@ -472,7 +378,7 @@ _no_delayslot:
/* jump to high level unaligned handler */
RESTORE_STATE;
bri unaligned_data_trap
-#endif
+
andi r6, r4, 0x3E0; /* Mask and extract the register operand */
srl r6, r6; /* r6 >> 5 */
srl r6, r6;
@@ -558,25 +464,10 @@ ex_shw:
ex_sw_end: /* Exception handling of store word, ends. */
ex_handler_done:
-#ifndef CONFIG_MMU
- lwi r5, r1, 0 /* RMSR */
- mts rmsr, r5
- nop
- lwi r3, r1, PT_R3
- lwi r4, r1, PT_R4
- lwi r5, r1, PT_R5
- lwi r6, r1, PT_R6
- lwi r17, r1, PT_R17
-
- rted r17, 0
- addik r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
-#else
RESTORE_STATE;
rted r17, 0
nop
-#endif
-#ifdef CONFIG_MMU
/* Exception vector entry code. This code runs with address translation
* turned off (i.e. using physical addresses). */
@@ -882,13 +773,7 @@ ex_handler_done:
* bits 20 and 21 are zero.
*/
andi r3, r3, PAGE_MASK
-#ifdef CONFIG_MICROBLAZE_64K_PAGES
- ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_64K)
-#elif CONFIG_MICROBLAZE_16K_PAGES
- ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_16K)
-#else
ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K)
-#endif
mts rtlbhi, r3 /* Load TLB HI */
nop
@@ -926,10 +811,8 @@ ex_handler_done:
rtsd r15,8
nop
-#endif
.end _hw_exception_handler
-#ifdef CONFIG_MMU
/* Unaligned data access exception last on a 4k page for MMU.
* When this is called, we are in virtual mode with exceptions enabled
* and registers 1-13,15,17,18 saved.
@@ -1044,7 +927,6 @@ ex_unaligned_fixup:
.word store6,ex_unaligned_fixup;
.previous;
.end _unaligned_data_exception
-#endif /* CONFIG_MMU */
.global ex_handler_unhandled
ex_handler_unhandled:
@@ -1093,11 +975,7 @@ lw_r27: R3_TO_LWREG (27);
lw_r28: R3_TO_LWREG (28);
lw_r29: R3_TO_LWREG (29);
lw_r30: R3_TO_LWREG (30);
-#ifdef CONFIG_MMU
lw_r31: R3_TO_LWREG_V (31);
-#else
-lw_r31: R3_TO_LWREG (31);
-#endif
sw_table:
sw_r0: SWREG_TO_R3 (0);
@@ -1131,13 +1009,8 @@ sw_r27: SWREG_TO_R3 (27);
sw_r28: SWREG_TO_R3 (28);
sw_r29: SWREG_TO_R3 (29);
sw_r30: SWREG_TO_R3 (30);
-#ifdef CONFIG_MMU
sw_r31: SWREG_TO_R3_V (31);
-#else
-sw_r31: SWREG_TO_R3 (31);
-#endif
-#ifdef CONFIG_MMU
lw_table_vm:
lw_r0_vm: R3_TO_LWREG_VM (0);
lw_r1_vm: R3_TO_LWREG_VM_V (1);
@@ -1205,7 +1078,6 @@ sw_r28_vm: SWREG_TO_R3_VM_V (28);
sw_r29_vm: SWREG_TO_R3_VM_V (29);
sw_r30_vm: SWREG_TO_R3_VM_V (30);
sw_r31_vm: SWREG_TO_R3_VM_V (31);
-#endif /* CONFIG_MMU */
/* Temporary data structures used in the handler */
.section .data
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index 51c43ee5e380..303aaf13573b 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -33,9 +33,7 @@ EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
#endif
-#ifdef CONFIG_MMU
EXPORT_SYMBOL(empty_zero_page);
-#endif
EXPORT_SYMBOL(mbc);
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index a9e46e525cd0..3afda1823730 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -69,9 +69,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
ti->cpu_context.r19 = (unsigned long)arg;
childregs->pt_mode = 1;
local_save_flags(childregs->msr);
-#ifdef CONFIG_MMU
ti->cpu_context.msr = childregs->msr & ~MSR_IE;
-#endif
ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8;
return 0;
}
@@ -81,9 +79,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
ti->cpu_context.r1 = (unsigned long)childregs;
-#ifndef CONFIG_MMU
- ti->cpu_context.msr = (unsigned long)childregs->msr;
-#else
childregs->msr |= MSR_UMS;
/* we should consider the fact that childregs is a copy of the parent
@@ -105,7 +100,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
ti->cpu_context.msr = (childregs->msr|MSR_VM);
ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
ti->cpu_context.msr &= ~MSR_IE;
-#endif
ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
/*
@@ -130,13 +124,10 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
regs->pc = pc;
regs->r1 = usp;
regs->pt_mode = 0;
-#ifdef CONFIG_MMU
regs->msr |= MSR_UMS;
regs->msr &= ~MSR_VM;
-#endif
}
-#ifdef CONFIG_MMU
#include <linux/elfcore.h>
/*
* Set up a thread for executing a new program
@@ -145,7 +136,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
{
return 0; /* MicroBlaze has no separate FPU registers */
}
-#endif /* CONFIG_MMU */
void arch_cpu_idle(void)
{
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 7fcf5279ad15..f417333eccae 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -190,12 +190,10 @@ static int microblaze_debugfs_init(void)
}
arch_initcall(microblaze_debugfs_init);
-# ifdef CONFIG_MMU
static int __init debugfs_tlb(void)
{
debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip);
return 0;
}
device_initcall(debugfs_tlb);
-# endif
#endif
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 5a8d173d7b75..fc61eb0eb8dd 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -157,10 +157,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct rt_sigframe __user *frame;
int err = 0, sig = ksig->sig;
unsigned long address = 0;
-#ifdef CONFIG_MMU
pmd_t *pmdp;
pte_t *ptep;
-#endif
frame = get_sigframe(ksig, regs, sizeof(*frame));
@@ -192,7 +190,6 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
regs->r15 = ((unsigned long)frame->tramp)-8;
address = ((unsigned long)frame->tramp);
-#ifdef CONFIG_MMU
pmdp = pmd_off(current->mm, address);
preempt_disable();
@@ -208,10 +205,6 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
}
pte_unmap(ptep);
preempt_enable();
-#else
- flush_icache_range(address, address + 8);
- flush_dcache_range(address, address + 8);
-#endif
if (err)
return -EFAULT;
diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c
index 778a761af0a7..a530a7a6be7d 100644
--- a/arch/microblaze/kernel/unwind.c
+++ b/arch/microblaze/kernel/unwind.c
@@ -161,22 +161,12 @@ static void microblaze_unwind_inner(struct task_struct *task,
* unwind_trap - Unwind through a system trap, that stored previous state
* on the stack.
*/
-#ifdef CONFIG_MMU
static inline void unwind_trap(struct task_struct *task, unsigned long pc,
unsigned long fp, struct stack_trace *trace,
const char *loglvl)
{
/* To be implemented */
}
-#else
-static inline void unwind_trap(struct task_struct *task, unsigned long pc,
- unsigned long fp, struct stack_trace *trace,
- const char *loglvl)
-{
- const struct pt_regs *regs = (const struct pt_regs *) fp;
- microblaze_unwind_inner(task, regs->pc, regs->r1, regs->r15, trace, loglvl);
-}
-#endif
/**
* microblaze_unwind_inner - Unwind the stack from the specified point
@@ -215,16 +205,7 @@ static void microblaze_unwind_inner(struct task_struct *task,
* HW exception handler doesn't save all registers,
* so we open-code a special case of unwind_trap()
*/
-#ifndef CONFIG_MMU
- const struct pt_regs *regs =
- (const struct pt_regs *) fp;
-#endif
printk("%sHW EXCEPTION\n", loglvl);
-#ifndef CONFIG_MMU
- microblaze_unwind_inner(task, regs->r17 - 4,
- fp + EX_HANDLER_STACK_SIZ,
- regs->r15, trace, loglvl);
-#endif
return;
}
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index 1b16875cea70..cd8a844bf29e 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -5,5 +5,5 @@
obj-y := consistent.o init.o
-obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
+obj-y += pgtable.o mmu_context.o fault.o
obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
index 81dffe43b18c..b7ad4a98636d 100644
--- a/arch/microblaze/mm/consistent.c
+++ b/arch/microblaze/mm/consistent.c
@@ -21,32 +21,3 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
flush_dcache_range(paddr, paddr + size);
}
-
-#ifndef CONFIG_MMU
-/*
- * Consistent memory allocators. Used for DMA devices that want to share
- * uncached memory with the processor core. My crufty no-MMU approach is
- * simple. In the HW platform we can optionally mirror the DDR up above the
- * processor cacheable region. So, memory accessed in this mirror region will
- * not be cached. It's alloced from the same pool as normal memory, but the
- * handle we return is shifted up into the uncached region. This will no doubt
- * cause big problems if memory allocated here is not also freed properly. -- JW
- *
- * I have to use dcache values because I can't relate on ram size:
- */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
-#else
-#define UNCACHED_SHADOW_MASK 0
-#endif /* CONFIG_XILINX_UNCACHED_SHADOW */
-
-void *arch_dma_set_uncached(void *ptr, size_t size)
-{
- unsigned long addr = (unsigned long)ptr;
-
- addr |= UNCACHED_SHADOW_MASK;
- if (addr > cpuinfo.dcache_base && addr < cpuinfo.dcache_high)
- pr_warn("ERROR: Your cache coherent area is CACHED!!!\n");
- return (void *)addr;
-}
-#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 45da639bd22c..7129a20881ea 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -29,11 +29,6 @@
/* Use for MMU and noMMU because of PCI generic code */
int mem_init_done;
-#ifndef CONFIG_MMU
-unsigned int __page_offset;
-EXPORT_SYMBOL(__page_offset);
-#endif /* CONFIG_MMU */
-
char *klimit = _end;
/*
@@ -82,13 +77,11 @@ static void highmem_setup(void)
static void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES];
-#ifdef CONFIG_MMU
int idx;
/* Setup fixmaps */
for (idx = 0; idx < __end_of_fixed_addresses; idx++)
clear_fixmap(idx);
-#endif
/* Clean every zones */
memset(zones_size, 0, sizeof(zones_size));
@@ -108,40 +101,6 @@ static void __init paging_init(void)
void __init setup_memory(void)
{
-#ifndef CONFIG_MMU
- u32 kernel_align_start, kernel_align_size;
- phys_addr_t start, end;
- u64 i;
-
- /* Find main memory where is the kernel */
- for_each_mem_range(i, &start, &end) {
- memory_start = start;
- lowmem_size = end - start;
- if ((memory_start <= (u32)_text) &&
- ((u32)_text <= (memory_start + lowmem_size - 1))) {
- memory_size = lowmem_size;
- PAGE_OFFSET = memory_start;
- pr_info("%s: Main mem: 0x%x, size 0x%08x\n",
- __func__, (u32) memory_start,
- (u32) memory_size);
- break;
- }
- }
-
- if (!memory_start || !memory_size) {
- panic("%s: Missing memory setting 0x%08x, size=0x%08x\n",
- __func__, (u32) memory_start, (u32) memory_size);
- }
-
- /* reservation of region where is the kernel */
- kernel_align_start = PAGE_DOWN((u32)_text);
- /* ALIGN can be remove because _end in vmlinux.lds.S is align */
- kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
- pr_info("%s: kernel addr:0x%08x-0x%08x size=0x%08x\n",
- __func__, kernel_align_start, kernel_align_start
- + kernel_align_size, kernel_align_size);
- memblock_reserve(kernel_align_start, kernel_align_size);
-#endif
/*
* Kernel:
* start: base phys address of kernel - page align
@@ -181,12 +140,6 @@ void __init mem_init(void)
mem_init_done = 1;
}
-#ifndef CONFIG_MMU
-int page_is_ram(unsigned long pfn)
-{
- return __range_ok(pfn, 0);
-}
-#else
int page_is_ram(unsigned long pfn)
{
return pfn < max_low_pfn;
@@ -330,8 +283,6 @@ void __init *early_get_page(void)
NUMA_NO_NODE);
}
-#endif /* CONFIG_MMU */
-
void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask)
{
void *p;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 60a58c0015f2..557585f1be41 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -325,12 +325,10 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus,
* memory, effectively behaving just like /dev/zero
*/
if ((offset + size) > hose->isa_mem_size) {
-#ifdef CONFIG_MMU
pr_debug("Process %s (pid:%d) mapped non-existing PCI",
current->comm, current->pid);
pr_debug("legacy memory for 0%04x:%02x\n",
pci_domain_nr(bus), bus->number);
-#endif
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
return 0;